Skip to main content

Ein Code Signing-Zertifikat erneut ausstellen

So stellen Sie Ihr Extended Validation (EV) Code Signing-Zertifikat neu aus

Wichtig

Umstellung auf Code Signing-Zertifikate mit mindestens 3072-Bit-RSA-Schlüssel durch die Branche

Um den Änderungen in der Branche gerecht zu werden, hat DigiCert die folgenden Änderungen an unserem Code Signing-Zertifikatsprozess vorgenommen:

  • Wir stellen nur noch Code-Signing-Zertifikate mit einem RSA-Schlüssel von 3072 Bit oder höher aus.*

  • Wir verwenden neue Zwischenzertifikate und Stammzertifikate für die Ausstellung unserer Code-Signing- und EV-Code-Signing-Zertifikate: RSA und ECC

DigiCert unterstützt zwei eToken:

  • 5110 CC für RSA 4096-bit und ECC P-256-bit Schlüsselzertifikate

  • 5110 FIPS für ECC P-256- und P-384-Bit-Schlüsselzertifikate

  • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit key certificates.

  • SafeNet eToken 5110+ CC (940B) ECC P-256-bit key certificates.

HSM muss:

  • Unterstützung von RSA 3072-Bit- oder ECC P-256-Bit-Schlüsselgrößen oder größer

  • FIPS 140-2 Level 2+ oder Common Criteria EAL4+ konforme Geräte

Erfahren Sie mehr über die Umstellung auf Code Signing-Zertifikate mit 3072-Bit-Schlüssel.

Bevor Sie beginnen

Are you reissuing your EV Code Signing certificate for an HSM device?

Falls Sie Ihr EV-CS-Zertifikat (Code Signing) für ein HSM-Gerät erneut ausstellen lassen, müssen Sie eine Zertifikatsunterschriftsanforderung (CSR) mit Ihrem Auftrag einreichen. Zur Sicherheit müssen Zertifikate einen RSA 3072-Bit- oder ECC P-256-Bit-Schlüssel oder eine größere Schlüssellänge verwenden. Lesen Sie in der Dokumentation Ihres HSM-Anbieters, wie Sie eine CSR für Ihren Antrag erstellen.

Zur Sicherheit benötigen Zertifikate mindestens einen 2048 Bit-Schlüssel. Lesen Sie in der Dokumentation Ihres HSM-Anbieters, wie Sie eine CSR für Ihren Antrag erstellen.

EV CS-Zertifikat neuausstellen

  1. Gehen Sie in Ihrem CertCentral-Konto im linken Hauptmenü auf Zertifikat > Aufträge.

  2. Klicken Sie auf der Seite „Aufträge“ in der Spalte Auftragsnummer auf den Schnellansicht-Link für das EV-Code-Signing-Zertifikat, das Sie erneut ausstellen lassen möchten.

  3. Klicken Sie (rechts) im Detailbereich der Auftragnummer auf Zertifikat erneut ausstellen.

  4. Nur HSM-Geräte – Falls Sie ein sicheres Token verwenden, fahren Sie mit Schritt 5 fort.

    1. Signatur-Hash

      Sofern Sie keinen bestimmten Grund für die Wahl eines anderen Signatur-Hashwerts haben, empfiehlt DigiCert, den Standardsignatur-Hashwert zu verwenden: SHA-256.

    2. Provisioning method

      The provisioning method refers to where you will store the private key and certificate. For the security of your EV Code Signing certificate, the certificate must be installed on and used from an approved device.

      Select the storage device for your EV Code Signing certificate and its' private key.

      • DigiCert-provided hardware token.

        DigiCert ships you a secure token with instructions for installing the certificate on your token, so you can start signing code.

        Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.

      • Use existing token.

        After DigiCert issues your EV code signing certificate, you need to install the certificate on your token.

        In the Platform dropdown, select the type of hardware token on which you plan to install your EV Code Signing certificate:

        • SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.

        • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

        Wichtig

        You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device. See Currently Supported eTokens. You will not be able to install the certificate on any device that is not on the list.

        If you don't have one of the approved tokens, please select the option to have a preconfigured hardware token shipped to you. If you have any questions, please contact DigiCert Support.

      • Install on HSM.

        After DigiCert issues your EV code signing certificate, install it on the HSM where you generated the private key and CSR.

        Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?

        Note that we will send the certificate requestor an agreement email. This email is to ensure that a private key is stored on an HSM that is certified as FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.

      Wichtig

      You must have a FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.

      Select a different provisioning method if you don't have a compatible HSM. If you have any questions, please contact DigiCert Support.

    3. Reason for reissue

      In the box, enter the reason for the certificate reissue.

  5. Klicken Sie auf Neuausstellung beantragen.

Wie geht es weiter?

Approval for your EV Code Signing certificate reissue may be required

If a reissue approval is required, we email the EV Code Signing verified contacts for the organization, informing them that they need to approve the certificate reissue request. Once we receive their approval, we'll reissue your EV Code Signing certificate.

Certificate issuance

Once the validation is complete and the order is verified-contact approved, we will issue your certificate. Then you can install your certificate on your hardware token or HSM.