Skip to main content

Réémettre un certificat de signature de code EV

Découvrez comment rééditer votre certificat de signature de code de validation étendue (EV)

Important

L'industrie passe à une clé RSA 3072 bits minimum pour les certificats de signature de code

Pour se conformer aux changements de l'industrie, DigiCert a apporté les modifications suivantes à son processus de certificat de signature de code :

  • N'émet que des certificats de signature de code avec une clé RSA 3072 bits ou supérieure*.

  • Utilise de nouvelles AC intermédiaires et des certificats racine pour émettre nos certificats de signature de code et de signature de code EV : RSA et ECC

DigiCert prend en charge deux eTokens :

  • 5110 CC pour les certificats de clé RSA 4096 bits et ECC P-256 bits

  • 5110 FIPS pour les certificats de clé ECC P-256 et P-384 bits.

  • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit key certificates.

  • SafeNet eToken 5110+ CC (940B) ECC P-256-bit key certificates.

Le HSM doit :

  • Prendre en charge les tailles de clés RSA 3072 bits ou ECC P-256 bits ou plus.

  • Relever de périphériques conformes à la norme FIPS 140-2 niveau 2+ ou aux critères communs EAL4+.

En savoir plus sur le passage aux certificats de signature de code à clé de 3072 bits..

Avant de commencer

Are you reissuing your EV Code Signing certificate for an HSM device?

Si vous émettez à nouveau votre certificat de signature de code EV pour un périphérique HSM, vous devez soumettre une demande de signature de certificat (CSR) avec votre demande. Pour rester sécurisés, les certificats doivent utiliser une clé d'une taille minimale RSA 3072 bits ou ECC P-256 bits. Consultez la documentation de votre fournisseur de HSM pour créer la CSR pour votre demande.

Pour conserver leur sécurité, les certificats doivent utiliser des clés d’au moins 2048 bits. Consultez la documentation de votre fournisseur de HSM pour créer la CSR pour votre demande.

Réémission de votre certificat EV CS

  1. Dans votre compte CertCentral, dans le menu à gauche, cliquez sur Certificate > Orders (Certificat > Commandes).

  2. Sur la page Orders (commande), dans la colonne Order # (N° de commande), cliquez sur le lien Quick View (Aperçu rapide) pour le certificat de signature de code EV que vous souhaitez émettre à nouveau.

  3. Dans le volet de détails Order # (Numéro de commande) à droite, cliquez sur Reissue Certificate (Réémettre le certificat).

  4. Périphériques HSM uniquement - Si vous utilisez un jeton sécurisé, passez à l'étape 5.

    1. Hachage de la signature

      À moins que vous ayez des raisons particulières de choisir un hachage de signature différent, DigiCert recommande d’utiliser le hachage de signature par défaut : SHA-256.

    2. Provisioning method

      The provisioning method refers to where you will store the private key and certificate. For the security of your EV Code Signing certificate, the certificate must be installed on and used from an approved device.

      Select the storage device for your EV Code Signing certificate and its' private key.

      • DigiCert-provided hardware token.

        DigiCert ships you a secure token with instructions for installing the certificate on your token, so you can start signing code.

        Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.

      • Use existing token.

        After DigiCert issues your EV code signing certificate, you need to install the certificate on your token.

        In the Platform dropdown, select the type of hardware token on which you plan to install your EV Code Signing certificate:

        • SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.

        • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

        Important

        You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device. See Currently Supported eTokens. You will not be able to install the certificate on any device that is not on the list.

        If you don't have one of the approved tokens, please select the option to have a preconfigured hardware token shipped to you. If you have any questions, please contact DigiCert Support.

      • Install on HSM.

        After DigiCert issues your EV code signing certificate, install it on the HSM where you generated the private key and CSR.

        Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?

        Note that we will send the certificate requestor an agreement email. This email is to ensure that a private key is stored on an HSM that is certified as FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.

      Important

      You must have a FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.

      Select a different provisioning method if you don't have a compatible HSM. If you have any questions, please contact DigiCert Support.

    3. Reason for reissue

      In the box, enter the reason for the certificate reissue.

  5. Cliquez sur Request Reissue (Demander une réémission).

Et ensuite ?

Approval for your EV Code Signing certificate reissue may be required

If a reissue approval is required, we email the EV Code Signing verified contacts for the organization, informing them that they need to approve the certificate reissue request. Once we receive their approval, we'll reissue your EV Code Signing certificate.

Certificate issuance

Once the validation is complete and the order is verified-contact approved, we will issue your certificate. Then you can install your certificate on your hardware token or HSM.