Skip to main content

Ordina un certificato di firma codice

New private key storage requirements

On May 30, 2023, DigiCert updated our private key storage requirements for code signing certificate private keys, per industry standards. All private keys for code signing certificates must be stored on hardware certified as FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent.

For more information, see our knowledge base articles:

Prima di iniziare

Importante

Per certificati di firma codice, il settore è passato a RSA con un minimo di chiave di 3072 bit

Per conformarsi ai cambiamenti del settore, DigiCert ha effettuato le seguenti modifiche al nostro processo di certificato di firma codice.

  • Emette unicamente certificati di firma codice con chiave RSA di almeno 3072 bit*

  • Usa nuovi certificati CA intermedi e radice per emettere i nostri certificati di firma codice e di firma codice EV. RSA ed ECC

Scopri di più sulla variazione ai certificati di firma codice con chiave a 3072 bit.

  • Preconvalida organizzazione

    Assicurati che l’organizzazione a cui vuoi associare il certificato di firma codice (CS) sia stata pre-convalidata per la convalida CS Organization. Nel menu a discesa Organizzazione, elenchiamo solo le organizzazioni con una convalida CS Organization. Consulta Invia un’organizzazione per la pre-convalida.

  • Preconvalida dominio

    Quando si aggiunge un indirizzo e-mail come soggetto di un certificato di firma codice, l’indirizzo e-mail deve includere un dominio convalidato. Ad esempio, se vuoi aggiungere mario.rossi@esempio.com, devi pre-convalidare esempio.com. Consulta Pre-convalida dominio. Solo i domini pre-convalidati sono visualizzati nel modulo d’ordine.

    For example, if you want to add john.doe@example.com, make sure example.com has been validated. See Domain prevalidation.

    Adding an email address is optional. Depending on how your account was set up, you may be unable to add an email address to your Code Signing certificate.

  • Genera CSR

    Se utilizzerai il certificato di firma codice (CS) con la piattaforma Sun Java, devi inviare una richiesta di firma certificato (CSR) insieme all’ordine. Tuttavia, puoi includere una CSR con l’ordine per qualsiasi piattaforma.

    Per restare protetti i certificati devono usare una chiave RSA 3072 da bit o ECC P da 256 bit o più grande. Per trovare istruzioni sulla creazione di una CSR per diversi sistemi operativi e diverse piattaforme, consultaCrea CSR per una richiesta certificato di firma codice.

Ordina il tuo certificato CS

  1. In the left main menu, hover over Request a Certificate , then under Code Signing Certificates, select Code Signing.

  2. On the Request a Code Signing Certificate page, in the For dropdown, select the division to manage the certificate.

    The For dropdown only appears if your account uses Divisions.

Impostazioni certificato

  1. Periodo di validità

    Seleziona un periodo di validità per il certificato: 1 anno, 2 anni o 3 anni.

    If needed, you can customize the expiration date or certificate length. However, you cannot exceed the 39-month maximum code signing certificate validity.

  2. Hash firma

    To set up automatic renewal for this code signing order, check Auto-renew order 30 days before expiration.

    A meno che tu non abbia un motivo specifico per scegliere un hash di firma diverso, DigiCert raccomanda di usare l’hash di firma predefinito: SHA-256.

    Suggerimento

    If your certificate still has validity remaining before it expires, DigiCert adds the remaining validity to your new certificate (up to 39 months).

Organization

  1. Add an organization.

    Select Add organization

    You can add an existing organization from your account or a new organization. The new organization will be added to your account. However, DigiCert must complete the code signing validation for the selected or new organization before we can issue your certificate.

    In the Add organization window, the following task as needed::

    • Add an existing organization.

      1. Select An existing organization.

        In the dropdown, select the organization and then select Add.

        If you choose an organization not validated for Code Signing certificates or if the organization's code signing validation has expired, DigiCert must validate the organization for code signing validation before we can issue your certificate.

      2. Organization and technical contacts.

        DigiCert automatically adds the contacts assigned to the organization to the request form. To see the organization and technical contacts, select Show organization contacts.

      3. Verified contacts.

        • DigiCert automatically adds the assigned contacts to the request form if the organization has code signing verified contacts. To view, change selections, or add verified contacts, expand Verified contacts.

        • The Add contacts popup window opens if the organization does not have assigned code signing verified contacts. In this window, you can add yourself, a user in your account, or a new contact as a verified contact. See Verified contacts below.

    • Add a new organization.

      1. Select A new organization and select Next.

      2. Under Organization address details, enter your organization's legal name, assumed name (optional), address, and phone number.

        DigiCert must validate the organization for code signing validation before we can issue your certificate.

      3. When ready, select Add.

    • Add an organization contact.

      In the Add organization window, add yourself or someone else from your account, or create a new organization contact.

      Importante

      The organization contact is whom we contact when validating the organization and verifying your authority to order a DigiCert certificate for the organization.

      They may also receive the following notifications:

      • Order status updates for certificates requested for their organization.

      • Domain status updates for domains associated with their organization.

      • Add yourself as the organization contact.

        Select Add me as the organization contact and then select Add or Next.

        1. If we have all your information, you will select Add.

        2. If we need more information, you will select Next, enter the missing information, and then select Add.

      • Add someone else as the organization contact.

        Select Add someone else as the organization contact. Then in the Add contact dropdown, select the contact or user and then select Add or Next.

        • If we have the needed user information, you will select Add.

        • If we need more user information, you will select Next, enter the missing information, and then select Add.

      • Create new contact.

        1. Select Add someone else as the organization contact.

        2. In the Add contact dropdown, select Create new contact and then select Next.

        3. Enter the needed user information and then select Add.

  2.  Technical contact for the organization (optional)

    We may contact a technical contact for inquiries regarding certificate orders for the organization. They may receive the certificate lifecycle-related emails: certificate issued, reissued, and expiring.

    • Add yourself as the technical contact.

      Select Add me as the technical contact for the organization and then select Add or Next.

      1. If we have all your information, you will select Add.

      2. If we need more information, you will select Next, enter the missing information, and then select Add.

    • Add someone else as the technical contact.

      Select Add someone else as the technical contact for the organization. Then in the Add contact dropdown, select the contact or user and then select Add or Next.

      1. If we have the needed user information, you will select Add.

      2. If we need more user information, you will select Next, enter the missing information, and then select Add.

    • Create new contact.

      1. Select Add someone else as the technical contact for the organization.

      2. In the Add contact dropdown, select Create new contact and then select Next.

      3. Enter the needed user information and then select Add.

  3. Verified contacts.

    A verified contact must represent the organization included in your certificate request. At least one EV code signing verified contact is required.

    To view, change selections, or add verified contacts, expand Verified contacts.

    • Select verified contacts.

      If the organization has multiple EV code signing verified contacts, you can select who receives the EV code signing order approval email.

      DigiCert sends the approval email to all selected, verified contacts, but only one needs to approve your order. Once the order is approved, DigiCert can issue your certificate. Selecting multiple verified contacts increases the likelihood of your order being approved quickly.

    • Add a verified contact.

      When adding a new verified contact, we will contact the organization directly to verify the individual's name, email, phone number, job title, and authority. Only after DigiCert validates a verified contact can they approve EV code signing orders for the organization.

      • Add yourself as the verified contact.

        Select Add me as a verified contact for the organization and then select Add or Next.

        1. If we have all your information, you will select Add.

        2. If we need more information, you will select Next, enter the missing information, and then select Add.

      • Add someone else as the verified contact.

        Select Add someone else as the verified contact for the organization. Then in the Add contact dropdown, select the contact or user and then select Add or Next.

        1. If we have the needed user information, you will select Add.

        2. If we need more user information, you will select Next, enter the missing information, and then select Add.

      • Create new contact.

        1. Select Add someone else as the verified contact for the organization.

        2. In the Add contact dropdown, select Create new contact and then select Next.

        3. Enter the needed information and then select Add.

  4. Additional emails (optional)

    Enter the email address you want to receive the certificate issuance, expiring certificate, and expiring order notifications. Separate addresses with commas or enter them on different lines.

    Depending on your account settings, your administrator may require you to include at least one additional email.

Order Settings

  • Provisioning options

    The provisioning method refers to where you will store the private key and certificate. For the security of your Code Signing certificate, the certificate must be installed on and used from an approved device.

    Select the storage device for your Code Signing certificate and its' private key.

    • DigiCert-provided hardware token

      DigiCert ships a secure token with instructions for installing the certificate on your token. So you can start signing code.

      Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.

    • Use existing token

      After DigiCert issues your code signing certificate, install the certificate on your token.

      In the Platform dropdown, select the type of hardware token on which you plan to install your Code Signing certificate:

      • SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.

      • SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.

      • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.

      • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

      Importante

      You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device. See Currently Supported eTokens. You cannot install the certificate on any device not on the list.

      Need an approved token?

      Please select DigiCert-provided hardware token to have a token shipped to you. If you have questions, please contact DigiCert Support.

    • Install on HSM

      After DigiCert issues your code signing certificate, install it on the HSM where you generated the private key and CSR.

      Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?

      Note that we will send the certificate requestor an agreement email. This email is to ensure that a private key is stored on an HSM that is certified as FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.

      Importante

      You must have a FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.

      Don't have a compatible HSM?

      Please select a different provisioning method. If you have any questions, please contact DigiCert Support.

    • DigiCert KeyLocker (Cloud HSM)

      KeyLocker is an automated cloud storage service where you can store your private key and code signing certificate. Access them anytime from anywhere to sign your code. Learn more.

      DigiCert also offers Software Trust Manager, an enterprise-level code signing solution. Contact your account representative to determine if your organization could benefit from Software Trust Manager. Learn more.

Additional certificate options

The information below is optional. None of it is required to issue your certificate.

  1. Unità organizzativa

    Enter the organization unit (OU) with which you want to associate the certificate and signatures. If you include an OU in your order, DigiCert must validate the OU before we can issue your certificate with the OU field in it.

    L’aggiunta di unità organizzazione è facoltativa. Puoi lasciare vuota questa casella.

  2. E-mail soggetto (solo account CertCentral Enterprise/Partner)

    Enter the email address you want to appear on the certificate. The email address must contain a validated domain associated with the organization included in the request, for example, email-username@validated-domain.

    Including an email address on the certificate is not required to issue your certificate. However, adding an email address provides an additional layer of trust for end users when checking your code signing certificate.

    1. Espandi Mostra domini disponibili e seleziona il dominio per il tuo indirizzo e-mail. L’indirizzo e-mail fornito deve avere un dominio convalidato.

    2. L’aggiunta dell’indirizzo e-mail che vuoi che appaia come soggetto sul Certificati di firma codice è facoltativa.

      • We don't show a dropdown if the organization only has one validated domain assigned to it.

      • You cannot include a subject email if the organization does not have any validated domains assigned to it.

Opzioni ordine

The information below is optional. None of it is required to issue your certificate.

  1. Comments to Administrator (optional)

    Enter any information your administrator might need for approving your request, about the purpose of the certificate, etc.

  2. Additional Renewal Message (optional)

    To create a renewal message for this certificate, add a message with information relevant to the certificate's renewal.

Informazioni pagamento

  1. Seleziona metodo di pagamento

    In Informazioni pagamento, seleziona un metodo di pagamento per pagare il certificato:

    1. Fattura sulla carta di credito

      Non hai un contratto o non vuoi usare il contratto per pagare questo certificato? Usa una carta di credito per pagare il certificato.

      We authorize the card when the request is made. However, we only complete the transaction once we issue your certificate. If you have a contract enabled, check Exclude from contract terms.

    2. Fattura sul saldo dell'account

      Non hai un contratto o non vuoi usare il contratto per pagare questo certificato? Addebita il costo al tuo saldo account.

      Per depositare fondi, fai clic sul link Deposita.

      The Deposit link takes you to another page in your CertCentral account. Any information entered in the request form will not be saved.

      If you have a contract enabled, check Exclude from contract terms.

    3. Paga con termini del contratto

      Hai un contratto e vuoi usarlo per pagare il certificato? Quando hai un contratto, è il metodo di pagamento predefinito.

  2. Accordo per i servizi dei certificati

    Seleziona Accordo per i servizi dei certificati. Leggi l'accordo e seleziona Accetto l'Accordo per i servizi dei certificati.

  3. Seleziona Invia richiesta certificato.

    Quando è necessaria un’approvazione, al contatto verificato CS per l’organizzazione viene inviata un’e-mail che lo informa che deve approvare la richiesta di certificato.

Passaggi successivi

DigiCert recommends that developers take precautions with the code signing process and protect the private key associated with their signing certificate. See Protect private keys: Code signing best practices.