Skip to main content

Emetti nuovamente il certificato di firma codice EV

Scopri come riemettere il tuo certificato di firma codice con convalida estesa (EV)

Importante

Per certificati di firma codice, il settore è passato a RSA con un minimo di chiave di 3072 bit

Per conformarsi ai cambiamenti del settore, DigiCert ha effettuato le seguenti modifiche al nostro processo di certificato di firma codice:

  • Emette unicamente certificati di firma codice con chiave RSA di almeno 3072 bit*

  • Usa nuovi certificati CA intermedi e radice per emettere i nostri certificati di firma codice e di firma codice EV. RSA ed ECC

DigiCert supporta due eToken:

  • 5110 CC per certificati con chiave RSA a 4096 bit e ECC P a 256 bit

  • 5110 FIPS per certificati con chiave ECC P a 256 bit e P a 383 bit.

  • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit key certificates.

  • SafeNet eToken 5110+ CC (940B) ECC P-256-bit key certificates.

HSM deve:

  • Supportare chiavi RSA a 3072 bit o ECC P a 256-bit o maggiori

  • Essere un dispositivo conforme a FIPS 140-2 Livello 2 o ai criteri comuni EAL4+.

Scopri di più sulla variazione ai certificati di firma codice con chiave a 3072 bit.

Prima di iniziare

Are you reissuing your EV Code Signing certificate for an HSM device?

Se stai riemettendo il certificato di firma codice EV per un dispositivo HSM, devi inviare una richiesta di firma certificato (CSR) insieme alla richiesta. Per restare protetti i certificati devono usare una chiave RSA 3072 da bit o ECC P da 256 bit o più grande. Fai riferimento alla documentazione del fornitore HSM per creare la CSR per la richiesta.

Per rimanere protetti, i certificati devono usare almeno una chiave da 2048 bit. Fai riferimento alla documentazione del fornitore HSM per creare la CSR per la richiesta.

Riemetti il certificato CS EV

  1. Nel tuo account CertCentral, nel menu principale sinistro, vai su Certificato > Ordini.

  2. Nella pagina Ordini, nella colonna N. ordine, fai clic sul link Panoramica rapida per il certificato di firma codice EV che desideri riemettere.

  3. Nel riquadro dei dettagli N. ordine (a destra), fai clic su Riemetti certificato.

  4. Solo dispositivi HSM – Se utilizzi un token protetto, passa al punto 5.

    1. Hash firma

      A meno che tu non abbia un motivo specifico per scegliere un hash di firma diverso, DigiCert raccomanda di usare l’hash di firma predefinito: SHA-256.

    2. Provisioning method

      The provisioning method refers to where you will store the private key and certificate. For the security of your EV Code Signing certificate, the certificate must be installed on and used from an approved device.

      Select the storage device for your EV Code Signing certificate and its' private key.

      • DigiCert-provided hardware token.

        DigiCert ships you a secure token with instructions for installing the certificate on your token, so you can start signing code.

        Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.

      • Use existing token.

        After DigiCert issues your EV code signing certificate, you need to install the certificate on your token.

        In the Platform dropdown, select the type of hardware token on which you plan to install your EV Code Signing certificate:

        • SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.

        • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

        Importante

        You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device. See Currently Supported eTokens. You will not be able to install the certificate on any device that is not on the list.

        If you don't have one of the approved tokens, please select the option to have a preconfigured hardware token shipped to you. If you have any questions, please contact DigiCert Support.

      • Install on HSM.

        After DigiCert issues your EV code signing certificate, install it on the HSM where you generated the private key and CSR.

        Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?

        Note that we will send the certificate requestor an agreement email. This email is to ensure that a private key is stored on an HSM that is certified as FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.

      Importante

      You must have a FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.

      Select a different provisioning method if you don't have a compatible HSM. If you have any questions, please contact DigiCert Support.

    3. Reason for reissue

      In the box, enter the reason for the certificate reissue.

  5. Fai clic su Riemissione della richiesta.

Passaggi successivi

Approval for your EV Code Signing certificate reissue may be required

If a reissue approval is required, we email the EV Code Signing verified contacts for the organization, informing them that they need to approve the certificate reissue request. Once we receive their approval, we'll reissue your EV Code Signing certificate.

Certificate issuance

Once the validation is complete and the order is verified-contact approved, we will issue your certificate. Then you can install your certificate on your hardware token or HSM.