Skip to main content

EV 코드 서명 인증서 주문

중요

업계는 코드 서명 인증서에 대해 최소 RSA 3072비트 키로 전환

업계 변경 사항을 준수하기 위해 DigiCert는 코드 서명 인증서 절차에 대해 다음을 변경했습니다:

  • RSA 3072비트 이상 코드 서명 인증서만 발급*

  • 코드 서명 및 EV 코드 서명 인증서를 발급하기 위해 새 중간 CA 및 루트 인증서를 사용: RSA 및 ECC

DigiCert는 두 개의 eTokens을 지원합니다:

  • RSA 4096-bit 및 ECC P-256-bit 키 인증서용 5110 CC

  • ECC P-256 및 P-384-bit 키 인증서용 5110 FIPS

  • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit key certificates.

  • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

HSM 요구 사항:

  • RSA 3072-bit 또는 ECC P-256-bit 키 크기 이상을 지원

  • FIPS 140-2 Level 2+ 또는 Common Criteria EAL4+ 규격 장치

3072비트 코드 서명 인증서로 변경에 대해 자세히 알아보세요.

시작하기 전에

  • 조직의 사전 유효성 검사EV 코드 서명 인증서를 받으려는 조직에 대해 사전 유효성 검사를 수행합니다. 조직 추가조직을 사전 유효성 검사를 위해 제출을 참조하십시오.

    조직의 사전 유효성 검사EV 코드 서명 인증서를 받으려는 조직에 대해 사전 유효성 검사를 수행합니다. 조직 추가조직을 사전 유효성 검사를 위해 제출을 참조하십시오.

  • CSR 생성(HSM 주문 전용)HSM 기기를 위해 EV 코드 서명 인증서를 다시 발급하려는 경우, 주문과 함께 CSR(인증서 서명 요청)을 제출해야 합니다.

    CSR 생성(HSM 주문 전용)HSM 기기를 위해 EV 코드 서명 인증서를 다시 발급하려는 경우, 주문과 함께 CSR(인증서 서명 요청)을 제출해야 합니다.

    보안을 유지하려면 인증서에서 RSA 3072비트 또는 ECC P-256비트 키 크기 이상을 사용해야 합니다. 요청에 대한 CSR을 만들려면 HSM 공급자의 설명서를 참조하십시오.

EV 코드 서명 인증서 주문

  1. In the left main menu, hover over Request a Certificate. Under Code Signing Certificates, select EV Code Signing.

  2. On the Request EV Code Signing Certificate page, in the For dropdown, select the division to manage the certificate.

    The For dropdown only appears if your account uses Divisions.

인증서 설정

  1. 유효 기간

    인증서에 대한 유효 기간 - 1년, 2년 또는 3년을 선택합니다.

    If needed, you can customize the expiration date or certificate length. However, you cannot exceed the 39-month maximum EV code signing certificate validity.

  2. 자동 갱신

    이 인증서에 대한 자동 갱신을 설정하려면 만료 30일 전에 주문을 자동 갱신을 클릭합니다.

    자동 갱신을 사용하면 인증서가 만료 날짜에 가까워지면 새 인증서 주문을 자동으로 제출합니다. 인증서에 만료되기 전에 남은 시간이 있는 경우, DigiCert는 현재 인증서의 남은 시간을(최대 39개월) 새 인증서에 추가합니다.

중요

If your certificate still has time remaining before it expires, DigiCert adds the remaining time from your current certificate to your new certificate (up to 39 months).

Organization

  1. 조직

    Select Add organization. The organization name will appear on the EV code signing certificate.

    드롭다운에서 EV 코드 서명 인증서를 주문하는 조직을 선택합니다. 이 조직 이름은 EV 코드 서명 인증서에 나타납니다.

    In the Add organization window, do one of the following:

    • Add an existing organization.

      1. Select An existing organization.

        In the dropdown, select the organization and then select Add.

        If you choose an organization not validated for EV Code Signing certificates or if the organization's EV code signing validation has expired, DigiCert must validate the organization for EV code signing validation before we can issue your certificate.

      2. Organization and technical contacts.

        DigiCert automatically adds the contacts assigned to the organization to the request form. To see the organization and technical contacts, select Show organization contacts.

      3. Verified contacts.

        • DigiCert automatically adds the assigned contacts to the request form if the organization has EV code signing verified contacts. To view, change selections, or add verified contacts, expand Verified contacts.

        • The Add contacts popup window opens if the organization has not assigned EV code signing verified contacts. In this window, you can add yourself, a user in your account, or a new contact as a verified contact. See Verified contacts below.

    • Add a new organization.

      1. Select A new organization and select Next.

      2. Under Organization address details, enter your organization's legal name, assumed name (optional), address, and phone number.

        DigiCert must validate the organization for EV code signing validation before we can issue your certificate.

      3. When ready, select Add.

    • Add an organization contact.

      In the Add organization window, add yourself or someone else from your account, or create a new organization contact.

      중요

      The organization contact is whom we contact when validating the organization and verifying your authority to order a DigiCert certificate for the organization.

      They may also receive the following notifications:

      • Order status updates for certificates requested for their organization.

      • Domain status updates for domains associated with their organization.

      • Add yourself as the organization contact.

        Select Add me as the organization contact and then select Add or Next.

        1. If we have all your information, you will select Add.

        2. If we need more information, you will select Next, enter the missing information, and then select Add.

      • Add someone else as the organization contact.

        Select Add someone else as the organization contact. Then in the Add contact dropdown, select the contact or user and then select Add or Next.

        1. If we have the needed user information, you will select Add.

        2. If we need more user information, you will select Next, enter the missing information, and then select Add.

      • Create new contact.

        1. Select Add someone else as the organization contact.

        2. In the Add contact dropdown, select Create new contact and then select Next.

        3. Enter the needed user information and then select Add.

  2. Technical contact for the organization (optional)

    We may contact a technical contact for inquiries regarding certificate orders for the organization. They may receive the certificate lifecycle-related emails: certificate issued, reissued, and expiring.

    • Add yourself as the technical contact.

      Select Add me as the technical contact for the organization and then select Add or Next.

      1. If we have all your information, you will select Add.

      2. If we need more information, you will select Next, enter the missing information, and then select Add.

    • Add someone else as the technical contact.

      Select Add someone else as the technical contact for the organization. Then in the Add contact dropdown, select the contact or user and then select Add or Next.

      1. If we have the needed user information, you will select Add.

      2. If we need more user information, you will select Next, enter the missing information, and then select Add.

    • Create new contact.

      1. Select Add someone else as the technical contact for the organization.

      2. In the Add contact dropdown, select Create new contact and then select Next.

      3. Enter the needed user information and then select Add.

  3. Verified contacts

    A verified contact must represent the organization included in your certificate request. At least one EV code signing verified contact is required.

    To view, change selections, or add verified contacts, expand Verified contacts.

    • Select verified contacts.

      If the organization has multiple EV code signing verified contacts, you can select who receives the EV code signing order approval email.

      DigiCert sends the approval email to all selected, verified contacts, but only one needs to approve your order. Once the order is approved, DigiCert can issue your certificate. Selecting multiple verified contacts increases the likelihood of your order being approved quickly.

    • Add a verified contact.

      When adding a new verified contact, we will contact the organization directly to verify the individual's name, email, phone number, job title, and authority. Only after DigiCert validates a verified contact can they approve EV code signing orders for the organization.

      • Add yourself as the verified contact.

        1. Select Add me as a verified contact for the organization and then select Add or Next.

        2. If we have all your information, you will select Add.

        3. If we need more information, you will select Next, enter the missing information, and then select Add.

      • Add someone else as the verified contact.

        Select Add someone else as the verified contact for the organization. Then in the Add contact dropdown, select the contact or user and then select Add or Next.

        1. If we have the needed user information, you will select Add.

        2. If we need more user information, you will select Next, enter the missing information, and then select Add.

      • Create new contact.

        1. Select Add someone else as the verified contact for the organization.

        2. In the Add contact dropdown, select Create new contact and then select Next.

        3. Enter the needed information and then select Add.

  4. 추가 이메일

    인증서 발급, 인증서 갱신과 같은 인증서 알림 이메일을 받을 사용자들의 이메일 주소(쉼표로 구분)를 입력합니다.

    Depending on your account settings, your administrator may require you to include at least one additional email.

Additional certificate options

The information below is optional. None of it is required to issue your EV code signing certificate.

  • 조직 부문

    조직 단위를 추가하는 것은 옵션입니다. 양식에서 이 상자는 비워 둘 수 있습니다.

    조직 단위를 추가하는 것은 옵션입니다. 양식에서 이 상자는 비워 둘 수 있습니다.

프로비전 옵션

  • Provisioning options

    The provisioning method refers to where you will store the private key and certificate. For the security of your EV Code Signing certificate, the certificate must be installed on and used from an approved device.

    Select the storage device for your EV Code Signing certificate and its' private key.

    • DigiCert-provided hardware token

      DigiCert ships a secure token with instructions for installing the certificate on your token. So you can start signing code.

      Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.

    • Use existing token

      After DigiCert issues your EV code signing certificate, install the certificate on your token.

      In the Platform dropdown, select the type of hardware token on which you plan to install your EV Code Signing certificate:

      • SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.

      • SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.

      • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.

      • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

      중요

      You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device. See Currently Supported eTokens. You cannot install the certificate on any device not on the list.

      Need an approved token?

      Please select DigiCert-provided hardware token to have a token shipped to you. If you have questions, please contact DigiCert Support.

    • Install on HSM

      After DigiCert issues your EV code signing certificate, install it on the HSM where you generated the private key and CSR.

      Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?

      Note that we will send the certificate requestor an agreement email. This email ensures the private key is stored on an HSM certified as FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.

      중요

      You must have a FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.

      Don't have a compatible HSM?

      Please select a different provisioning method. If you have questions, please contact DigiCert Support.

    • DigiCert KeyLocker (Cloud HSM)

      KeyLocker is an automated cloud storage service where you can store your private key and code signing certificate. Access them anytime from anywhere to sign your code. Learn more.

      DigiCert also offers Software Trust Manager, an enterprise-level code signing solution. Contact your account representative to determine if your organization could benefit from Software Trust Manager. Learn more.

Additional order options

The information below is optional. None of it is required to issue your certificate.

  1. Comments to Administrator (optional)

    Enter any information your administrator might need for approving your request, about the purpose of the certificate, etc.

  2. 추가 갱신 가능 메시지

    이 인증서에 대한 갱신 메시지를 만들려면 인증서의 갱신에 관련된 정보를 포함한 갱신 메시지를 입력합니다.

결제 정보

  1. 결제 방법 선택

    결제 정보 아래에서 인증서를 지불하는 결제 방법을 선택합니다.

    1. 신용 카드에 청구

      계약이 되어 있지 않거나, 이 인증서에 대해서는 계약을 사용하지 않겠습니까? 신용 카드를 사용하여 인증서에 대해 결제합니다.

      요청을 받은 후에 카드를 승인합니다. 그렇지만 인증서를 발급한 후에만 트랜잭션을 완료합니다.

      계약을 사용하고 있는 경우, 계약 조건에서 제외를 선택합니다.

    2. 계정 잔액에 청구

      계약이 되어 있지 않거나, 이 인증서에 대해서는 계약을 사용하지 않겠습니까? 비용을 계정 잔액에 청구합니다.

      금액을 입금하려면 입금 링크를 클릭하십시오. 이 링크를 클릭하면 CertCentral 계정의 내의 다른 페이지로 연결됩니다. 요청 양식에서 입력한 정보는 저장되지 않습니다.

      계약을 사용하고 있는 경우, 계약 조건에서 제외를 선택합니다.

    3. 계약 조건으로 결제

      계약이 되어 있으며 계약을 사용하여 인증서에 대해 결제하시겠습니까? 계약이 있는 경우, 계약이 기본 결제 방법입니다.

  2. 인증서 서비스 계약

    계약을 읽고 인증서 서비스 계약에 동의합니다를 선택합니다.

  3. 인증서 요청 제출을 클릭합니다.

    Selecting Submit Certificate Request also means you agree to all the terms and conditions in the Master Services Agreement.

다음 단계

DigiCert recommends that developers take precautions with the code signing process and protect the private key associated with their signing certificate. See Protect private keys: Code signing best practices.