Skip to main content

EV 코드 서명 인증서 재발급

EV(확장 유효성 검사) 코드 서명 인증서 재발급 방법 알아보기

중요

업계는 코드 서명 인증서에 대해 최소 RSA 3072비트 키로 전환

업계 변경 사항을 준수하기 위해 DigiCert는 코드 서명 인증서 절차에 대해 다음을 변경했습니다:

  • RSA 3072비트 이상 코드 서명 인증서만 발급*

  • 코드 서명 및 EV 코드 서명 인증서를 발급하기 위해 새 중간 CA 및 루트 인증서를 사용: RSA 및 ECC

DigiCert는 두 개의 eTokens을 지원합니다:

  • RSA 4096-bit 및 ECC P-256-bit 키 인증서용 5110 CC

  • ECC P-256 및 P-384-bit 키 인증서용 5110 FIPS

  • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit key certificates.

  • SafeNet eToken 5110+ CC (940B) ECC P-256-bit key certificates.

HSM 요구 사항:

  • RSA 3072-bit 또는 ECC P-256-bit 키 크기 이상을 지원

  • FIPS 140-2 Level 2+ 또는 Common Criteria EAL4+ 규격 장치

3072비트 코드 서명 인증서로 변경에 대해 자세히 알아보세요.

시작하기 전에

Are you reissuing your EV Code Signing certificate for an HSM device?

HSM 기기를 위해 EV 코드 서명 인증서를 다시 발급하려는 경우, 요청과 함께 CSR(인증서 서명 요청)을 제출해야 합니다. 보안을 유지하려면 인증서에서 RSA 3072비트 또는 ECC P-256비트 키 크기 이상을 사용해야 합니다. 요청에 대한 CSR을 만들려면 HSM 공급자의 설명서를 참조하십시오.

보안을 유지하려면 인증서는 최소 2048비트 키 크기를 사용해야 합니다. 요청에 대한 CSR을 만들려면 HSM 공급자의 설명서를 참조하십시오.

EV CS 인증서 다시 발급

  1. CertCentral 계정의 왼쪽 메인 메뉴에서 인증서 > 주문으로 이동합니다.

  2. 주문 페이지의 주문 번호 열에서 다시 발급하려는 EV 코드 서명 인증서에 대한 빠른 보기 링크를 클릭합니다.

  3. 주문 번호 세부 정보 창에서(오른쪽에) 인증서 재발급을 클릭합니다.

  4. HSM 장치만 해당 - 보안 토큰을 사용하는 경우 5단계로 건너뜁니다.

    1. 서명 해시

      다른 서명 해시를 선택할 특정 이유가 없는 경우, DigiCert는 기본값 서명 해시 SHA-256.

    2. Provisioning method

      The provisioning method refers to where you will store the private key and certificate. For the security of your EV Code Signing certificate, the certificate must be installed on and used from an approved device.

      Select the storage device for your EV Code Signing certificate and its' private key.

      • DigiCert-provided hardware token.

        DigiCert ships you a secure token with instructions for installing the certificate on your token, so you can start signing code.

        Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.

      • Use existing token.

        After DigiCert issues your EV code signing certificate, you need to install the certificate on your token.

        In the Platform dropdown, select the type of hardware token on which you plan to install your EV Code Signing certificate:

        • SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.

        • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

        중요

        You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device. See Currently Supported eTokens. You will not be able to install the certificate on any device that is not on the list.

        If you don't have one of the approved tokens, please select the option to have a preconfigured hardware token shipped to you. If you have any questions, please contact DigiCert Support.

      • Install on HSM.

        After DigiCert issues your EV code signing certificate, install it on the HSM where you generated the private key and CSR.

        Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?

        Note that we will send the certificate requestor an agreement email. This email is to ensure that a private key is stored on an HSM that is certified as FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.

      중요

      You must have a FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.

      Select a different provisioning method if you don't have a compatible HSM. If you have any questions, please contact DigiCert Support.

    3. Reason for reissue

      In the box, enter the reason for the certificate reissue.

  5. 다시 발급 요청을 클릭합니다.

다음 단계

Approval for your EV Code Signing certificate reissue may be required

If a reissue approval is required, we email the EV Code Signing verified contacts for the organization, informing them that they need to approve the certificate reissue request. Once we receive their approval, we'll reissue your EV Code Signing certificate.

Certificate issuance

Once the validation is complete and the order is verified-contact approved, we will issue your certificate. Then you can install your certificate on your hardware token or HSM.