为 A10 负载均衡器配置传感器(无代理)自动化设置

按照以下步骤为 A10 负载均衡器配置无代理设置。

为 A10 负载均衡器配置无代理设置

  1. 登录传感器主机。

  2. 转到传感器 CLI 目录。

    cd install_dir/cli

    其中 install_dir 是传感器的安装目录。

  3. 运行 addagentless 命令。

    • Linux:

    ./addagentless.sh -type A10

    • Windows:

    addagentless.bat -type A10

    输入命令后,会对需要输入的各个设置显示一系列提示。看到每项提示后,输入负载均衡器的具体设置并按返回

例如:

addagentless.bat -type A10

generic
Sensor CLI. Copyright 2020, DigiCert Inc.
Add or change login credentials and specify data IP addresses for certificate automation.
Enter management IP address:10.141.17.192
Enter Management Port (443):443
If available, do you want to map this sensor with the previously voided loadbalancer (Y/N)?:N
Important: Enter an account that has admin (superuser) permission to manage all partitions on the A10 load balancer.
Enter admin username:admin
Enter admin password:
Confirm admin password:
Successfully added or changed the agentless.
IMPORTANT: After you run this command, return to Manage Automation Agents. Verify that the certificate host appears and is configured.