Skip to main content

Primary nameservers and delegation

To use DigiCert​​®​​ as your primary DNS provider, create a primary zone, configure its records, and update the domain’s delegation to use the intended authoritative nameservers.

Creating a zone or assigning a nameserver set in DigiCert®​​ DNS does not automatically update delegation at your domain registrar.

What a primary nameserver is

A nameserver answers DNS queries. An authoritative nameserver hosts a zone’s DNS data and answers queries using those records.

For example, when a resolver requests the address for www.example.com, the domain’s authoritative nameservers provide the answer from the zone’s records.

Each nameserver has a hostname, such as ns200.digicertdns.com, and IP addresses through which it can be reached.

When DigiCert​​®​​ hosts your primary zone, you manage its records directly in DigiCert®​​ DNS. See Primary DNS zones for zone creation and management instructions.

Delegation identifies the authoritative nameservers that resolvers should contact. Changing delegation changes which DNS service answers queries; it does not copy records between providers.

Explore the Nameservers page

To view nameservers for a primary zone, go to DNS > Zones, select Primary zones, open the zone, and select the Nameservers tab.

After creating a primary zone, open this tab to review its assigned nameservers.

The page displays two groups:

Group

Description

Assigned nameservers

The nameservers assigned to the zone in DigiCert®​​ DNS

Delegated nameservers

The nameservers currently detected in the domain’s delegation

The tables display the following information:

Field

Description

Nameserver

The nameserver’s fully qualified domain name

IPv4 address

The nameserver’s IPv4 address

IPv6 address

The nameserver’s IPv6 address

Status

Whether an assigned nameserver is included in the detected delegation; shown in Assigned nameservers

Use these groups to compare the zone’s assigned nameservers with its detected delegation. For example, the assigned group may show DigiCert​​®​​ nameservers while the delegated group still shows a previous provider.

An Active zone status does not confirm that delegation is complete. Review the nameserver statuses to check whether the assigned servers are included.

Assign nameservers to a zone

Review the nameservers listed for your zone before configuring delegation. The Nameservers tab displays assignment and delegation information; it does not provide a separate action for creating a DNS server.

To include a nameserver hostname in a reusable configuration, select an existing nameserver or enter its FQDN in a user-defined nameserver set. Then assign that set to the primary zone.

See Nameserver sets for instructions to create or edit a set, add nameserver hostnames, and apply the set to a zone.

Entering a hostname in a nameserver set does not, by itself, establish a functioning DNS service at that hostname.

If you use custom or vanity nameserver hostnames, ensure they have working DNS service and the required address configuration before using them in delegation. Depending on the configuration, your registrar may also require nameserver host registration or glue records.

After applying a nameserver set, return to the Nameservers tab and review the assigned nameservers before updating delegation.

Nameserver addresses

The Nameservers tab and Configure primary DNS service dialog display nameserver hostnames and their IPv4 and IPv6 addresses.

Use the hostnames displayed for your zone when updating nameserver settings at your registrar. Provide address information if the registrar requires it.

Always use the values shown for your zone rather than copying example addresses from documentation.

The Configure primary DNS service dialog separates the authoritative nameservers used for delegation from the addresses used for transfers and notifications.

Nameservers for transfers and notifications

If another DNS provider hosts a secondary copy of your primary zone, configure transfers and notifications so that provider can obtain updated records.

Function

Purpose

Zone transfer

Allows a secondary nameserver to obtain zone data from the primary service

Notification

Alerts a secondary nameserver that the primary zone has changed so it can check for updates

This configuration is needed when another provider receives zone data from DigiCert®​​ DNS. It is separate from registrar delegation.

Configure transfer access

Configure an outbound IP set with the authorized secondary transfer destinations and the destinations that should receive notifications. Apply the set to the primary zone.

If transfers require TSIG authentication, configure the corresponding key at both providers.

See Outbound IP sets for destination configuration and TSIG keys for authentication.

Configure your secondary provider

Configure your secondary provider to retrieve zone data from the following DigiCert​​®​​ primary zone transfer endpoints:

Address family

Zone transfer endpoint

IPv4

54.245.236.74

IPv4

54.245.236.109

IPv4

156.154.38.151

IPv4

156.154.119.151

IPv4

54.225.199.225

IPv4

54.197.245.255

IPv6

2610:a1:3014:128::151/128

IPv6

2610:a1:3044:128::151/128

The IPv6 entries use /128 to identify individual addresses. If your secondary provider requires an IP address rather than CIDR notation, enter the address without /128.

If your network restricts outbound traffic, allow your secondary nameservers to reach these endpoints.

These are destinations for transfer requests from your secondary provider. Do not enter them as nameservers at your domain registrar.

Configure notifications and verify synchronization

Ensure the notification destinations in your outbound IP set identify the secondary provider’s intended NOTIFY receivers. Follow that provider’s requirements for accepting notifications from DigiCert®​​ DNS.

After completing the configuration, verify at the secondary provider that the zone transferred successfully and that subsequent changes are received.

The optional second step in Configure primary DNS service provides transfer and notification information. For registrar delegation, use the authoritative nameservers listed in the dialog’s first step.

Delegate a zone to DigiCert®​​ DNS

Before changing delegation, verify that the primary zone contains the records needed for your website, email, domain verification, and other services. Make sure you can update the domain’s nameserver settings at its registrar.

When moving from another DNS provider, keep the previous DNS service available during the transition so it can continue answering queries that use cached delegation information.

If the zone already uses DNSSEC, coordinate the signing configuration and parent-zone DS records as part of the migration. A DS record that does not match the new provider’s signing keys can cause DNS validation failures. See DNSSEC before changing delegation.

To delegate a zone for a registered domain:

  1. Go to DNS > Zones and select Primary zones.

  2. Open the zone and select Nameservers.

  3. Review the hostnames under Assigned nameservers.

  4. Sign in to your domain registrar and open the domain’s nameserver settings.

  5. Update the settings to include the nameservers intended to serve the zone.

  6. Save the changes.

  7. Return to the zone’s Nameservers tab to review delegation.

You can also obtain the nameserver details from Configure primary DNS service.

If DigiCert®​​ DNS will be the only authoritative provider, use the assigned DigiCert​​®​​ nameservers. If you use multiple providers, ensure every delegated provider is configured to serve the zone.

For a separately delegated subdomain, configure delegation in its parent zone.

Allow time for changes to be published and for previously cached delegation information to expire.

Verify DNS delegation

After updating delegation, compare Assigned nameservers with Delegated nameservers on the zone’s Nameservers tab.

The assigned nameservers display these statuses:

Status

Meaning

Action

Delegated

The assigned nameserver is included in the detected delegation

Confirm that the complete delegation matches your intended configuration

Not delegated

The assigned nameserver is absent from the detected delegation

Add or correct the hostname at the registrar if it should serve the domain

Hover over a Not delegated status to view guidance about updating your registrar.

If the delegated group still lists a previous provider, check that the registrar change was saved and allow time for it to become visible.

If the page displays No delegated nameservers found, verify that the domain is registered and correctly delegated at the registrar.

A Delegated status confirms that a nameserver appears in the detected delegation. It does not confirm that every website, email, or other DNS record is correct. After changing delegation, verify that your services work as expected.

Review delegation again whenever you change the zone’s assigned nameservers.