Skip to main content

A10

With an A10 connector, you can use DigiCert​​®​​ Trust Lifecycle Manager to discover and manage certificates on an A10 network appliance.

The connector uses an on-premises DigiCert sensor within your network to help securely manage the A10 appliance.

When you add the connector, Trust Lifecycle Manager discovers existing certificates on the A10 appliance and adds them to your centralized inventory. From there, you can manage and automate certificate lifecycles on the appliance to ensure it always has valid certificates installed.

Supported A10 appliances

Trust Lifecycle Manager supports integration with A10 appliance versions 2.7.2 and later. DigiCert has officially tested the following A10 appliance versions.

Before you begin

A10 requirements

To configure the A10 connector in Trust Lifecycle Manager, you will need:

  • The management IP address and port number for the A10 appliance.

  • Account credentials (username and password) for a user with full administrator access on the A10 appliance.

DigiCert requirements

  • The A10 connector requires at least one DigiCert​​®​​ sensor on your network that can connect to both the A10 appliance and Trust Lifecycle Manager. To learn more, see Deploy and manage sensors.

  • To configure the A10 connector and manage the integration, you need the Manager user role for Trust Lifecycle Manager.

Add the A10 connector

To add the A10 connector in Trust Lifecycle Manager:

  1. From the Trust Lifecycle Manager main menu, select Integrations > Connectors.

  2. Select the Add connector button.

  3. Under Appliances, select the option for A10.

  4. Fill out the Add connector form:

    • Name: Enter a friendly name for the connector to help identify it.

    • Business unit: Select a business unit for this connector for administrative purposes. Only users assigned to this business unit can manage the connector.

    • Managing sensor: Select an active DigiCert sensor on your network to use to establish the connection and help manage the appliance.

    • Management IP: Enter the management IP address for the appliance.

    • Management port: Enter the management port number for the appliance.

    • Username: Enter the username for a user account with full administrator access on the appliance.

    • Password: Enter the corresponding password for the above user account on the appliance.

  5. Select Add to create the appliance connector with the configured settings.

What's next

Discovery

  • Trust Lifecycle Manager discovers existing certificates and unsecured endpoints on the connected appliance and adds them to your centralized Inventory.

  • On the Integrations > Connectors page, select the connector by name to view the connector details and see the number of assets Trust Lifecycle Manager found on it. You can use the links in the Assets found section to view those assets in your inventory.

    Belangrijk

    On network appliance virtual IPs, certificates must be stored in X.509 format for Trust Lifecycle Manager to discover and automate them. Password-protected PFX certificates are not supported.

Automation

In deze sectie: