코드 서명 인증서 주문
New private key storage requirements
On May 30, 2023, DigiCert updated our private key storage requirements for code signing certificate private keys, per industry standards. All private keys for code signing certificates must be stored on hardware certified as FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent.
For more information, see our knowledge base articles:
시작하기 전에
중요
업계는 코드 서명 인증서에 대해 최소 RSA 3072비트 키로 전환
업계 변경 사항을 준수하기 위해 DigiCert는 코드 서명 인증서 절차에 대해 다음을 변경했습니다:
RSA 3072비트 이상 코드 서명 인증서만 발급*
코드 서명 및 EV 코드 서명 인증서를 발급하기 위해 새 중간 CA 및 루트 인증서를 사용: RSA 및 ECC
조직 사전 유효성 검사
CS(코드 서명)과 연결하려는 조직이 CS 조직 사전 유효성 검사를 완료했는지 확인합니다. 조직 드롭다운에는 CS 조직 유효성 검사를 완료한 조직만 나열합니다. 조직을 사전 유효성 검사를 위해 제출을 참조하십시오.
도메인 사전 유효성 검사
이메일 주소를 코드 서명 인증서의 제목으로 추가할 때, 이메일 주소는 유효성을 검사한 도메인을 포함해야 합니다. 예를 들어, john.doe@example.com을 추가하려면 example.com을 사전 유효성 검사해야 합니다. 도메인 사전 유효성 검사를 참조하십시오. 사전 유효성을 검사한 도메인만 주문 양식에 나타납니다.
For example, if you want to add john.doe@example.com, make sure example.com has been validated. See Domain prevalidation.
Adding an email address is optional. Depending on how your account was set up, you may be unable to add an email address to your Code Signing certificate.
CSR 생성
Sun Java 플랫폼에서 자신의 CS(코드 서명) 인증서를 사용하려는 경우, 주문과 함께 CSR(인증서 서명 요청)을 제출해야 합니다. 그렇지만 모든 플랫폼에 대해 주문에 CSR을 포함시킬 수 있습니다
보안을 유지하려면 인증서에서 RSA 3072비트 또는 ECC P-256비트 키 크기 이상을 사용해야 합니다. 다른 운영 체제 및 플랫폼에 대해 CSR을 만드는 설명을 확인하려면 코드 서명 인증서 요청에 대해 CSR 만들기를 참조하십시오.
CS 인증서 주문
In the left main menu, hover over Request a Certificate , then under Code Signing Certificates, select Code Signing.
On the Request a Code Signing Certificate page, in the For dropdown, select the division to manage the certificate.
The For dropdown only appears if your account uses Divisions.
인증서 설정
유효 기간
인증서에 대한 유효 기간 - 1년, 2년 또는 3년을 선택합니다.
If needed, you can customize the expiration date or certificate length. However, you cannot exceed the 39-month maximum code signing certificate validity.
서명 해시
To set up automatic renewal for this code signing order, check Auto-renew order 30 days before expiration.
다른 서명 해시를 선택할 특정 이유가 없는 경우, DigiCert는 기본값 서명 해시 SHA-256.
작은 정보
If your certificate still has validity remaining before it expires, DigiCert adds the remaining validity to your new certificate (up to 39 months).
Organization
Add an organization.
Select Add organization.
You can add an existing organization from your account or a new organization. The new organization will be added to your account. However, DigiCert must complete the code signing validation for the selected or new organization before we can issue your certificate.
In the Add organization window, the following task as needed::
Add an existing organization.
Select An existing organization.
In the dropdown, select the organization and then select Add.
If you choose an organization not validated for Code Signing certificates or if the organization's code signing validation has expired, DigiCert must validate the organization for code signing validation before we can issue your certificate.
Organization and technical contacts.
DigiCert automatically adds the contacts assigned to the organization to the request form. To see the organization and technical contacts, select Show organization contacts.
Verified contacts.
DigiCert automatically adds the assigned contacts to the request form if the organization has code signing verified contacts. To view, change selections, or add verified contacts, expand Verified contacts.
The Add contacts popup window opens if the organization does not have assigned code signing verified contacts. In this window, you can add yourself, a user in your account, or a new contact as a verified contact. See Verified contacts below.
Add a new organization.
Select A new organization and select Next.
Under Organization address details, enter your organization's legal name, assumed name (optional), address, and phone number.
DigiCert must validate the organization for code signing validation before we can issue your certificate.
When ready, select Add.
Add an organization contact.
In the Add organization window, add yourself or someone else from your account, or create a new organization contact.
중요
The organization contact is whom we contact when validating the organization and verifying your authority to order a DigiCert certificate for the organization.
They may also receive the following notifications:
Order status updates for certificates requested for their organization.
Domain status updates for domains associated with their organization.
Add yourself as the organization contact.
Select Add me as the organization contact and then select Add or Next.
If we have all your information, you will select Add.
If we need more information, you will select Next, enter the missing information, and then select Add.
Add someone else as the organization contact.
Select Add someone else as the organization contact. Then in the Add contact dropdown, select the contact or user and then select Add or Next.
If we have the needed user information, you will select Add.
If we need more user information, you will select Next, enter the missing information, and then select Add.
Create new contact.
Select Add someone else as the organization contact.
In the Add contact dropdown, select Create new contact and then select Next.
Enter the needed user information and then select Add.
Technical contact for the organization (optional)
We may contact a technical contact for inquiries regarding certificate orders for the organization. They may receive the certificate lifecycle-related emails: certificate issued, reissued, and expiring.
Add yourself as the technical contact.
Select Add me as the technical contact for the organization and then select Add or Next.
If we have all your information, you will select Add.
If we need more information, you will select Next, enter the missing information, and then select Add.
Add someone else as the technical contact.
Select Add someone else as the technical contact for the organization. Then in the Add contact dropdown, select the contact or user and then select Add or Next.
If we have the needed user information, you will select Add.
If we need more user information, you will select Next, enter the missing information, and then select Add.
Create new contact.
Select Add someone else as the technical contact for the organization.
In the Add contact dropdown, select Create new contact and then select Next.
Enter the needed user information and then select Add.
Verified contacts.
A verified contact must represent the organization included in your certificate request. At least one EV code signing verified contact is required.
To view, change selections, or add verified contacts, expand Verified contacts.
Select verified contacts.
If the organization has multiple EV code signing verified contacts, you can select who receives the EV code signing order approval email.
DigiCert sends the approval email to all selected, verified contacts, but only one needs to approve your order. Once the order is approved, DigiCert can issue your certificate. Selecting multiple verified contacts increases the likelihood of your order being approved quickly.
Add a verified contact.
When adding a new verified contact, we will contact the organization directly to verify the individual's name, email, phone number, job title, and authority. Only after DigiCert validates a verified contact can they approve EV code signing orders for the organization.
Add yourself as the verified contact.
Select Add me as a verified contact for the organization and then select Add or Next.
If we have all your information, you will select Add.
If we need more information, you will select Next, enter the missing information, and then select Add.
Add someone else as the verified contact.
Select Add someone else as the verified contact for the organization. Then in the Add contact dropdown, select the contact or user and then select Add or Next.
If we have the needed user information, you will select Add.
If we need more user information, you will select Next, enter the missing information, and then select Add.
Create new contact.
Select Add someone else as the verified contact for the organization.
In the Add contact dropdown, select Create new contact and then select Next.
Enter the needed information and then select Add.
Additional emails (optional)
Enter the email address you want to receive the certificate issuance, expiring certificate, and expiring order notifications. Separate addresses with commas or enter them on different lines.
Depending on your account settings, your administrator may require you to include at least one additional email.
Order Settings
Provisioning options
The provisioning method refers to where you will store the private key and certificate. For the security of your Code Signing certificate, the certificate must be installed on and used from an approved device.
Select the storage device for your Code Signing certificate and its' private key.
DigiCert-provided hardware token
DigiCert ships a secure token with instructions for installing the certificate on your token. So you can start signing code.
Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.
Use existing token
After DigiCert issues your code signing certificate, install the certificate on your token.
In the Platform dropdown, select the type of hardware token on which you plan to install your Code Signing certificate:
SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.
SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.
SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.
SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.
중요
You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device. See Currently Supported eTokens. You cannot install the certificate on any device not on the list.
Need an approved token?
Please select DigiCert-provided hardware token to have a token shipped to you. If you have questions, please contact DigiCert Support.
Install on HSM
After DigiCert issues your code signing certificate, install it on the HSM where you generated the private key and CSR.
Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?
Note that we will send the certificate requestor an agreement email. This email is to ensure that a private key is stored on an HSM that is certified as FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.
중요
You must have a FIPS 140 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.
Don't have a compatible HSM?
Please select a different provisioning method. If you have any questions, please contact DigiCert Support.
DigiCert KeyLocker (Cloud HSM)
KeyLocker is an automated cloud storage service where you can store your private key and code signing certificate. Access them anytime from anywhere to sign your code. Learn more.
DigiCert also offers Software Trust Manager, an enterprise-level code signing solution. Contact your account representative to determine if your organization could benefit from Software Trust Manager. Learn more.
Additional certificate options
The information below is optional. None of it is required to issue your certificate.
조직 부문
Enter the organization unit (OU) with which you want to associate the certificate and signatures. If you include an OU in your order, DigiCert must validate the OU before we can issue your certificate with the OU field in it.
조직 단위를 추가하는 것은 옵션입니다. 이 상자는 비워 둘 수 있습니다.
주체 이메일 (CertCentral 엔터프라이즈/파트너 전용)
Enter the email address you want to appear on the certificate. The email address must contain a validated domain associated with the organization included in the request, for example, email-username@validated-domain.
Including an email address on the certificate is not required to issue your certificate. However, adding an email address provides an additional layer of trust for end users when checking your code signing certificate.
사용 가능한 도메인 표시를 확장한 후에 이메일 주소에 대한 도메인을 선택합니다. 제공한 이메일 주소에는 유효성을 검사한 도메인이 있어야 합니다.
코드 서명 인증서에 주체로 나타나는 이메일 주소를 추가하는 것은 옵션입니다.
We don't show a dropdown if the organization only has one validated domain assigned to it.
You cannot include a subject email if the organization does not have any validated domains assigned to it.
주문 옵션
The information below is optional. None of it is required to issue your certificate.
Comments to Administrator (optional)
Enter any information your administrator might need for approving your request, about the purpose of the certificate, etc.
Additional Renewal Message (optional)
To create a renewal message for this certificate, add a message with information relevant to the certificate's renewal.
결제 정보
결제 방법 선택
결제 정보 아래에서 인증서를 지불하는 결제 방법을 선택합니다.
신용 카드에 청구
계약이 되어 있지 않거나, 이 인증서에 대해서는 계약을 사용하지 않겠습니까? 신용 카드를 사용하여 인증서에 대해 결제합니다.
We authorize the card when the request is made. However, we only complete the transaction once we issue your certificate. If you have a contract enabled, check Exclude from contract terms.
계정 잔액에 청구
계약이 되어 있지 않거나, 이 인증서에 대해서는 계약을 사용하지 않겠습니까? 비용을 계정 잔액에 청구합니다.
금액을 입금하려면 입금 링크를 클릭하십시오.
The Deposit link takes you to another page in your CertCentral account. Any information entered in the request form will not be saved.
If you have a contract enabled, check Exclude from contract terms.
계약 조건으로 결제
계약이 되어 있으며 계약을 사용하여 인증서에 대해 결제하시겠습니까? 계약이 있는 경우, 계약이 기본 결제 방법입니다.
인증서 서비스 계약
인증서 서비스 계약을 선택합니다. 계약을 읽고 인증서 서비스 계약에 동의합니다를 선택합니다.
인증서 요청 제출을 선택합니다.
승인이 필요하면 조직에 대한 CS 확인된 연락처에게 인증서 요청을 승인할 필요가 있음을 알리는 이메일을 보냅니다.
다음 단계
DigiCert recommends that developers take precautions with the code signing process and protect the private key associated with their signing certificate. See Protect private keys: Code signing best practices.