Skip to main content

补发 EV 代码签名证书

了解如何补发扩展验证 (EV) 代码签名证书

重要

对代码签名证书的行业要求改为最低 RSA 3072 位密钥

为了遵守更改后的行业要求，DigiCert 对我们的代码签名证书流程进行了以下更改：

  • 仅颁发最低 RSA 3072 位密钥的代码签名证书*

  • 使用新的中间证书 CA 和根证书颁发代码签名和 EV 代码签名证书：RSA 和 ECC

DigiCert 支持两种电子令牌：

  • 5110 CC（适用于 RSA 4096 位和 ECC P-256 位密钥证书）

  • 5110 FIPS（适用于 ECC P-256 和 P-384 位密钥证书）

  • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit key certificates.

  • SafeNet eToken 5110+ CC (940B) ECC P-256-bit key certificates.

HSM 必须：

  • 支持最低 RSA 3072 位或 ECC P-256 位密钥大小

  • 必须是符合 FIPS 140-2 Level 2+ 或通用标准 EAL4+ 的设备

详细了解 3072 位密钥代码签名证书的更改。

在开始之前

Are you reissuing your EV Code Signing certificate for an HSM device?

如果要为 HSM 设备补发 EV 代码签名证书，必须通过请求提交证书签名请求 (CSR)。为了保持安全，证书必须使用最低 RSA 3072 位或 ECC P-256 位密钥大小。请参阅您的 HSM 提供商的文档，以便为您的请求创建 CSR。

为了保证安全，证书必须使用 2048 位密钥。请参阅您的 HSM 提供商的文档，以便为您的请求创建 CSR。

补发 EV CS 证书

  1. 在您的 CertCentral 帐户的左侧主菜单中，转到证书 > 订单。

  2. 在“订单”页的订单编号列，单击您要补发的 EV 代码签名证书的快速查看链接。

  3. 在订单编号详细信息窗格（右侧）中，单击补发证书。

  4. 仅限 HSM 设备 - 如果您使用安全令牌，则跳到步骤 5。

    1. 签名哈希

      除非您有特定的原因选择其他签名哈希，否则 DigiCert 建议使用默认签名哈希：SHA-256。

    2. Provisioning method

      The provisioning method refers to where you will store the private key and certificate. For the security of your EV Code Signing certificate, the certificate must be installed on and used from an approved device.

      Select the storage device for your EV Code Signing certificate and its' private key.

      • DigiCert-provided hardware token (nonrefundable)

        DigiCert ships you a secure token with instructions for installing the certificate on your token, so you can start signing code.

        Then, under Shipping address, add your shipping information: your name and the address where you want us to send the hardware token.

      • Use existing token

        After DigiCert issues your EV code signing certificate, you need to install the certificate on your token.

        In the Platform dropdown, select the type of hardware token on which you plan to install your EV Code Signing certificate:

        • SafeNet eToken 5110 CC (940) for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110 FIPS for ECC P-256 and P-384-bit key certificates.

        • SafeNet eToken 5110+ FIPS for RSA 4096-bit and ECC P-256-bit or higher key certificates.

        • SafeNet eToken 5110+ CC (940B) for ECC P-256-bit key certificates.

        重要

        You must have a FIPS 140-2 Level 2 or Common Criteria EAL4+ compliant device listed above. You cannot install the certificate on any device not on the list.

        Need an approved token?

        Please select DigiCert-provided hardware token to have a token shipped to you. If you have questions, please contact DigiCert Support.

      • Install on HSM

        After DigiCert issues your EV code signing certificate, install it on the HSM where you generated the private key and CSR.

        Select Yes under Was the private key generated by a Common Criteria EAL4+ standard or FIPS 140-2 level 2 HSM?

        Note that we will send the certificate requestor an agreement email. This email is to ensure that a private key is stored on an HSM that is certified as FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent. DigiCert will only issue the certificate after the requester agrees to the private key protection requirement.

      重要

      You must have a FIPS 140-2 Level 2, Common Criteria EAL 4+, or equivalent hardware security module (HSM) that supports at least 3072-bit keys.

      Select a different provisioning method if you don't have a compatible HSM. If you have any questions, please contact DigiCert Support.

    3. Reason for reissue

      In the box, enter the reason for the certificate reissue.

  5. 单击申请补发。

接下来

Approval for your EV Code Signing certificate reissue may be required

If a reissue approval is required, we email the EV Code Signing verified contacts for the organization, informing them that they need to approve the certificate reissue request. Once we receive their approval, we'll reissue your EV Code Signing certificate.

Certificate issuance

Once the validation is complete and the order is verified-contact approved, we will issue your certificate. Then you can install your certificate on your hardware token or HSM.

本节内容如下: